Purpose
This tutorial give an example of using a I2C device on the MB1225 evaluation
kit. The device is a 0.56” 4-Digit 7-Segments Display w/I2C Backpack from Adafruit.
Prerequisites
- A STMicroelectronics discovery kit with STM32F769NI MCU, order code 32F769IDISCOVERY (name on PCB: STM32F769I-DISCO).
- USB 2.0 male to micro USB cable (supplied with evaluation kit).
- A full installation of an Hyperpanel OS release on a linux based PC including tools for flashing and debugging. This tutorial requires release V10.03.02 for MB997D or higher. Hyperpanel OS releases are available for free in the Download section of the website.
- A Lunix PC with ARM gcc compiler, ARM gdb debugger and minicom installed.
- A text editor to edit or modify source codes (We are using vi in our demo).
- The 0.56″ 4-Digit 7-Segment Display with I2C Backpack from Adafruit.
Software release
Hyperpanel OS V30.01.01 for MB1225 (hypv300101.zip) or higher, available in the Download section.
Binary file
Installation
– On www.tutorial.hyperpanel.com, select Download from the main menu.
– Download “Hyperpanel OS V30.01.01 for MB1225” or higher release for the MB1225 kit (hypv300101.zip).
– On your PC Linux, copy and unzip the zip file in your root directory, for example:
cp hypv300101.zip /home/hyperpanel cd /home/hyperpanel unzip hypv300101.zip
– With a text editor, update hhome environment variable in the stm32m7 file:
cd ~/hypv300101/shells vi stm32m4
Update the first line, according to your root directory:
export hhome=/home/hyperpanel/hypv300101
– Save this file and an execute the command:
source stm32m7
– From this tutorial, use the button “Binary file” to download the zip file containing the binary. Unzip this file:
unzip hpos-tuto411-bin.zip
– Copy this binary file in HyperPanelOS release:
cp led7seg.bin ~/hypv300101/boards/stm32m7/exe
– Connect the 7-Segments LED screen to the MB1225 (see image). The Arduino Uno Rev3 Connector CN9 is ready to use as followed:
7-SEGMENTS LED MB1225-CN9 SIGNAL WIRE
SCL <-----------------> CN9/10/PB8/D15 I2C_SCL Yellow
SDA <-----------------> CN9/ 9/PB9/D15 I2C_SDA Green
VCC <-----------------> CN9/ 8/AVDD/AVDD Power Red
GND <-----------------> CN9/ 7/GND/GND Ground Black
– Connect the MB1225 board to a USB port on your Linux PC using the USB cable supplied with the board. Wait for a window to appear, then close it.
– Open a Terminal window and run minicom to get access to the Hyperpanel OS serial port and to the application messages:
minicom -D /dev/ttyACM0 -b 115200
– Open another Terminal window on your computer and enter the following commands:
cd ~/hypv300101/shells source stm32m7 exe
– Upload software to the board:
hgdb romload stm32m7 led7seg
You should see messages similar to these:
Open On-Chip Debugger 0.10.0+dev-00001-g0ecee83-dirty (2017-02-10-06:53)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
0x08005634 in ?? ()
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x20000046 msp: 0x20002000
auto erase enabled
target halted due to breakpoint, current mode: Thread
xPSR: 0x61000000 pc: 0x20000046 msp: 0x10002000
wrote 524288 bytes from file led7seg.bin in 10.224703s (50.075 KiB/s)
Cannot access memory at address 0xffffffff
led7seg.elf: No such file or directory.
Wait until the flashing operation is complete (approx. 30 seconds). The last message (led7seg.elf: No such file or directory) is normal.
– You can now press on the reset button (black button) of the MB1225. Hyperpanel OS will start, a counter “xx:xx” starts on the LED device and also on the serial port.
To go further
If you want to edit the source code, write modifications, compile, link, etc., here’s how to do it :
- From this tutorial, use the button “Source code” to download the zip file containing the source file. Unzip this file:
unzip hpos-tuto411-source.zip
- Copy this source code in HyperPanelOS release:
cp led7seg.c ~/hypv300101/user/stm32app
- Copy the link file in Hyperpanel release:
cp led7seg.lst ~/hypv300101/boards/stm32m7/exe
- You can edit and make any modifications you want in the source file. For example, you can modify the default “curtime” value. To do this, simply modify the value in the “loop_app_tsk()” procedure at the line 151 of the source file.
cd ~/hypv100302/user/stm32app vi led7seg.c
- Save the source file.
- Compile the source file:
cd ~/hypv100302/user/stm32app cmm led7seg
- Make a link edit to create a new executable:
exe lhypos led7seg
- You can now upload this new binary to the board, in the same way as in
the previous Installation chapter.
Description
- The app gives an “how to use” example of an I2C device in “write” mode. The I2C driver available with HyperPanel OS support several controller/buses in parallel. In the case of the MB1225, there are several I2C bus but we use in the example one bus only.
- The 7-Segment Backpack Kit include one single I2C device. There are 4 digits and a double dot characters. Each digit have 7 segments and all segments have easy access thrue I2C messages.
- The I2C driver support IO lists, including waits, conditionnal jumps and intricated loops. We use here some “waits” command for initialization sequence, according to the information of datasheets.
- The driver provides two software interfaces in order to allow for both ease of use and versatility: Blocking and non blocking interfaces. We use here the blocking interface (i2c_write()).
- This example is a simple use of the bargraph with one device. But because I2C is a bus, we can connect several I2C devices and use them in the app (cf. other tutorials with several I2C devices).
Documents
Links
LED 7-segments animation
Code
hypos-tuto411-source
/*
** led7seg.c - Sample code for HyperpanelOS ============================== **
** **
** This simple code is located into the application container, it is run **
** by the VMK sub-operating system. On the other hand, the I/O container **
** runs all the drivers that are VMIO finite state machines. **
** **
** The goal of this small app is to use a LED 7-segments I2C display device **
** **
** ======================================================================= **
*/
/* Documentation for I2C devices --------------------------------------------
- HT16K33 18*8 LED Controller data sheet
*/
/* Include files and external reference -------------------------------------*/
#include <hypos.h> // Hyperpanel OS basic interfaces. */
#include <drv_asy.h> // Prototype of "asy_write()". */
#include <drv_i2c.h> // Prototype of "i2c_*()". */
/* Internal defines of this module ------------------------------------------*/
#define TICK 1000 // Code for tick event.
#define DUMMY_AD 0xFF // I2C dev address - Dummy for wait.
#define LED_AD 0xE0 // I2C dev address - LED (8bits address)
#define INIT 0 // I2C command - Bargraph initialisation
#define DOT_OFF 2 // I2C command - Double dot OFF
#define DOT_ON 4 // I2C command - Double dot ON
/* Internal global variables of this module --------------------------------*/
static unsigned int idto ; // Timer identifier.
/* INIT command .............................................................*/
static const char init[] = // I2C command - Display initialisation
{
/* Length-1, Address, Control byte, Data byte */
1, LED_AD , 0x21 , // BAR dev : Turn on oscillator
1, LED_AD , 0x81 , // BAR dev : Display ON Blinking OFF
// BAR dev - Clear the display.
11, LED_AD , 0x00, 0x00, 0x00, // Character 1
0x00, 0x00, // Character 2
0x00, 0x00, // Double dot in the middle
0x00, 0x00, // Character 3
0x00, 0x00, // Character 4
0 , // End of command set
} ; //
static const char dot_off[] = // I2C command - Double dot OFF
{
/* Length-1, Address, Control byte, Data byte */
2, LED_AD , 0x04, 0x00 , // Double dot OFF
1, DUMMY_AD , 50 , // Temporisation
0 , // End of command set
} ; //
static const char dot_on[] = // I2C command - Double dot ON
{
/* Length-1, Address, Control byte, Data byte */
2, LED_AD , 0x04, 0x02 , // Double dot ON
0 , // End of command set
} ; //
static char *command[] = // I2C commands table
{ //
(char*)&init , // I2C command - SCREEN_INIT
(char*)0 , // Padding
(char*)&dot_off , // I2C command - SET_LINE1
(char*)0 , // Padding
(char*)&dot_on , // I2C command - SET_LINE2
(char*)0 , // Padding
} ; //
static const char digit[] = // Digit on 7-segment coding
{
0x3F , // "0" digit
0x06 , // "1" digit
0x5B , // "2" digit
0x4F , // "3" digit
0x66 , // "4" digit
0x6D , // "5" digit
0x7D , // "6" digit
0x07 , // "7" digit
0x7F , // "8" digit
0x6F , // "9" digit
} ;
/* Prototypes --------------------------------------------------------------*/
static int loop_app_task(void*) ; // Prototype
static int wait_evt(void) ; // Prototype
static void set_command(int) ; // Prototype
/* Beginning of the code ---------------------------------------------------
loop_app_tsk Application entry point
*/
/* Procedure loop_app_tsk --------------------------------------------------
Purpose : This is our task main loop.
*/
int loop_app_tsk (void *param)
{
int ev = TICK ; // Our event
int curtime = -1 ; // Current time in second
int ret = 0 ; // Return procedure code
char mess[32] ; // Message to be sent on ASY0
unsigned int time ; // Time to be display on 7-segments
unsigned char buf[20] ; //
/* Step 1 - Start a timer that will send an event every second ..............*/
set_uto(CLOCK , // Timer mode: clock
1000 , // Duration in milliseconds
TICK , 0 , // Event code and reserve field
&idto ); // Timer identifier
/* Step 2 - LED 7-segment initialisation ....................................*/
asy_write(0,(unsigned char*)"Init ...\r\n",10);
set_command(INIT) ; // LED 7-segment display initialization
asy_write(0,(unsigned char*)"done\r\n",6);
/* Step 3 - Get time ........................................................*/
curtime = 0 ; // Start at "00:00"
/* Step 4 - Main loop .......................................................*/
wait_ev : // Beginning of loop label
if ( ev == TICK ) // If the event is the tick event
{ //
curtime ++ ; // Time incrementation
/* Step 4.1 - Display time on serial port each second .......................*/
hsprintf(mess , // Format de timer message.
" %02d:%02d\r\n" , //
(curtime / 60)%60 , // Minutes.
curtime %60 ); // Seconds.
asy_write(0 , // Write on ASY0
(unsigned char*)mess , // the "mess" message
strlen(mess) ); // Count of bytes to be sent
/* Step 4.2 - Display timer on the LED 7-segments display each second .......*/
set_command(DOT_OFF) ; // Turn double dot OFF
time=((curtime/60)%60)*100 + // Minutes.
curtime %60 ; // Seconds.
memset(buf , 0x00 , 15); // Reset display buffer
memset(buf , 11 , 1); // Number of byte to write
memset(buf+1 , LED_AD, 1); // I2C device address
memset(buf+3 ,digit[(time/1000)%10],1); // Digit 1
memset(buf+5 ,digit[(time/ 100)%10],1); // Digit 2
memset(buf+9 ,digit[(time/ 10)%10],1); // Digit 3
memset(buf+11,digit[ time%10 ],1); // Digit 4
ret = i2c_write( // Send I2C command
0 , // Controller number
PRO_I2C_DEV , // Protocol code
-1 , // Target address unused with FLG_MULTI
0 , // Target sub-address
buf , // Command
0 , // Count of bytes unused with FLG_MULTI
FLG_MULTI ); // List of option flags
if (ret) // i2c_write() return an error
{ //
hsprintf(mess, // Format an error message
"ERR <i2c_write> ret=%d",ret); //
asy_write(0 , // Write message on ASY0
(unsigned char*)mess , //
strlen(mess) ); //
} //
set_command(DOT_ON) ; // Turn double dot ON
}
ev = wait_evt() ; // Unschedule until an event is received
goto wait_ev ; // Wait for the next event
return 0 ; // Return code of the procedure
}
/* Procedure wait_evt ------------------------------------------------------*/
/*
Purpose : Unschedule until the next event is received, whatever it is.
*/
static int wait_evt (void)
{
unsigned int waitlist[1][3] ; // Parameter of "waitevt_task"
/*****************************************************************************
* Step 1 : Build a list with one WAIT_CODEINT entry that will accept all *
* ------ the event codes ranging from 0 to 20000. Then call *
* "waitevt_task", we will be unscheduled until the next event will *
* be received *
*****************************************************************************/
waitlist[0][0] = WAIT_CODEINT ; // All events with
waitlist[0][1] = 0 ; // a code between 0
waitlist[0][2] = 20000 ; // and 20000
waitevt_task(waitlist , // Address of waiting list
1 , // Size of "waitlist[]"
0 , // maximum waiting time = no
0 ) ; // Do not purge previous events
/*****************************************************************************
* Step 2 : Here we are scheduled again. The VMK has written into its *
* ------ global variable "task_evt" a copy of the event that has *
* scheduled us again. *
*****************************************************************************/
return task_evt.code ; // Return event code
}
/* Procedure set_command ---------------------------------------------------*/
/*
Purpose : Send a set of commands to I2C devices.
*/
static void set_command(int cmd)
{
int ret = 0 ; // Return procedure code
char mess[64] ; // Message to be sent on ASY0
ret = i2c_write( // Send I2C command
0 , // Controller number
PRO_I2C_DEV , // Protocol code
-1 , // Target address unused with FLG_MULTI
0 , // Target sub-address
(unsigned char*)command[cmd] , // Commands
0 , // Count of bytes unused with FLG_MULTI
FLG_MULTI ); // Flag for "several cmd in same buffer"
if (ret) // i2c_write() return an error
{ //
hsprintf(mess, // Format an error message
"ERR <i2c_write> ret=%d",ret); //
asy_write(0 , // Write message on ASY0
(unsigned char*)mess , //
strlen(mess) ); //
} //
}
The 32F769IDISCOVERY / MB1225 evaluation kit
ST-LINK USB connector to the computer
USB cable
Wires for I2C device / Arduino connector
The 7-Segments Backpack
How to connect wires on the MB1225
How to connect wires on the I2C device
Application running
Traces of the application on serial port
Terminal
~/hypv100302/boards/stm32m7/exe >> hgdb
GNU gdb (7.10-1ubuntu3+9) 7.10
Copyright (C) 2015 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "--host=x86_64-linux-gnu --target=arm-none-eabi".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word".
man Display again this manual
stm32m7 Send the reset halt command to openocd
armdisconnect Deconnexion command
peek adr Read and display a 32 bit value at adr
poke adr val Write a val 32 bits value at adr
poke_m adr msk val Write bits in a 32 bits word with a mask
peekrange base o1 o2 Read 32 bits words from base+o1 to base+o2
affichb adr size Print a memory area starting at adr
vmio n Display the tnote_evt_s debug table
int Display the tnote_it debug table
rte Return from interrupt
romload stm32m7 app Write the app executable file in flash
rom stm32m7 app Connect to target and load app dbg symbols
gpio bank n state Set GPIO n (0-15) of bank (1-9) to 0/1
clock 0/1/2/3 Output SYSCLK/PLLI2S/HSE/PLL to MO2/PC9
(gdb) romload stm32m7 led7seg
Open On-Chip Debugger 0.10.0+dev-00001-g0ecee83-dirty (2017-02-10-06:53)
Licensed under GNU GPL v2
For bug reports, read
http://openocd.org/doc/doxygen/bugs.html
0x00002ed2 in ?? ()
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x00003148 msp: 0x10002000
auto erase enabled
target halted due to breakpoint, current mode: Thread
xPSR: 0x61000000 pc: 0x20000046 msp: 0x10002000
wrote 393216 bytes from file led7seg.bin in 11.088839s (34.629 KiB/s)
(gdb)